Ship News

Dutch inland vessel to be converted and powered by zero-emissions hydrogen propulsion system

Posted on by News Hound
Dutch inland vessel to be converted and powered by zero-emissions hydrogen propulsion system
Dutch inland vessel to be converted and powered by zero-emissions hydrogen propulsion system

A Dutch inland vessel is going to be converted later this year to operate on a zero-emissions hydrogen propulsion system. The project is viewed as a prototype for the development of a fleet of inland and shortsea vessels that will operate in the region and be available for charter.

The 360-foot inland vessel, Maas, is part of a project being undertaken by Future Proof Shipping, a Dutch company focused on the conversion to green energy. The Holland Shipyards Group’s yard in Hardinxveld will undertake the conversion starting in the third quarter of 2021 with the vessel expected to be back in service in December. Once back in service, the Maas will operate transporting shipping Continue reading “Dutch inland vessel to be converted and powered by zero-emissions hydrogen propulsion system”

P&I club guidance on proper coal cargo carriage

Posted on by News Hound
P&I club guidance on proper coal cargo carriage
P&I club guidance on proper coal cargo carriage

Coal is an important, widely-used source of energy that is regularly moved as cargo by ship. However, failure to implement proper coal cargo carriage is associated with a number of hazards; it must be carried according to the relevant regulatory requirements.

According to the Britannia Club P&I Club, due to its origins as a carbonaceous sedimentary rock formed by geological processes applying pressure to the remains of plant material over time, coal comes in many different forms and the term covers a relatively wide range of cargoes. Therefore, its properties and the associated hazards also vary significantly depending on the specific form of coal being carried as cargo. However, all coal cargoes require certain Continue reading “P&I club guidance on proper coal cargo carriage”

Electrocution fatality during maintenance onboard explained in Britannia’s BSafe campaign case study

Posted on by News Hound
Image courtesy of RMI - Electrocution fatality explained in Britannia's BSafe campaign
Image courtesy of RMI – Electrocution fatality explained in Britannia’s BSafe campaign

As part of its BSafe campaign, the Britannia P&I Club describes a fatality of an electrician from electrocution, while performing maintenance of the inert gas scrubber electrical system whilst onboard an oil tanker. The electrician had been working alone at the time. Before starting work in the morning on the day of the incident, the second engineer (2/E) held a Toolbox Talk to discuss the work planned for that day. The electrician mentioned he might work on the inert gas (IG) scrubber pump starter panel, but he did not specify the items to be completed, nor the timeframe for the work. No formal risk assessment, permit to work (PTW) or Lock Out/Tag Out (LOTO) procedure were completed, despite all being specifically required by the SMS.

Continue reading “Electrocution fatality during maintenance onboard explained in Britannia’s BSafe campaign case study”

UK P&I Club releases ‘Ask an Expert’ video on grain contamination claims

Posted on by News Hound
UK P&I Club releases ‘Ask an Expert’ video on grain contamination claims
UK P&I Club releases ‘Ask an Expert’ video on grain contamination claims

The UK P&I Club has released the latest video in its online ‘Ask an Expert’ series, featuring Chris Ellyatt from CWA International on the increasing number of grain contamination claims and their causes. The Club continues to see a number of grain contamination claims and Chris Ellyatt explains it is often difficult to work out if these claims are due to the inherent contaminants at the load port, or if they are a result of improper hold cleaning by the ship staff.

Chris highlights the importance of diligent recordkeeping during cargo loading to ensure any untoward contaminants Continue reading “UK P&I Club releases ‘Ask an Expert’ video on grain contamination claims”

Key loss prevention tips for containers lost overboard published in new guide

Posted on by News Hound
Key loss prevention tips for containers lost overboard published in new guide
Key loss prevention tips for containers lost overboard published in new guide

Amid an alarming trend of containers lost overboard, the Swedish P&I Club has published a 32 page guide offering guidance on planning and loading the containers. According to the Club’s statistics, the main reason for containers being lost overboard is related to container vessels navigating in heavy weather, combined with crew failure to reduce speed and/or alter course to avoid it or alleviate its effect. The reasons can often be attributed to a series of multiple failures, rather than a single cause, but raising awareness of these issues to both ship and shore staff will serve to prevent accidents from happening.

The guide also notes that other common factors are
– Containers not being correctly stuffed or declared by the shipper;
Continue reading “Key loss prevention tips for containers lost overboard published in new guide”

Overtightening of locating bolts led to engine failure and grounding

Posted on by News Hound
Overtightening of locating bolts led to engine failure and grounding
Overtightening of locating bolts led to engine failure and grounding

The Swedish P&I Club has described in its Monthly Safety Scenario the case of a bulk carrier grounding caused by engine failure. Soon after departing port, a main engine slowdown alarm was triggered due to a loss of cooling water in the main engine. The Master ordered half head, but there was no response from the engine.

The bulk carrier in question loaded a cargo of soya beans in a North American port prior to travelling to Asia. When loading was completed, the vessel anchored to wait for a favourable tide. At midnight, the vessel departed and headed through the fairway. A pilot was onboard and a pilot briefing had been carried out with the Master. Continue reading “Overtightening of locating bolts led to engine failure and grounding”

Report published on cargo ship sinking in heavy weather that led to eight fatalities

Posted on by News Hound
Report published on cargo ship sinking in heavy weather - Image courtesy of JTSB
Report published on cargo ship sinking in heavy weather – Image courtesy of JTSB

Japan Transportation Safety Board (JTSB) has published an investigation report on the foundering of JIA DE the cargo ship sinking due to heavy weather in Kanagawa Prefecture, which led to fatalities of 8 crew members in October 2019.

The cargo ship JIA DE, with 12 crew onbaord, was anchoring at K1 anchorage point of Keihin Port on the way to proceed to Song Dang Port, Vietnam, when it encountered winds and waves due to the typhoon No.19 (Asian name “Hagibis”) approaching, and heeled to the starboard side.

The ship subsequently rolled over and took on seawater into the interior of the cargo holds, and thereby foundered around the anchorage at around 21:39 on October 12, 2019. The master and three crewmembers were rescued, but eight crewmembers died.

Continue reading “Report published on cargo ship sinking in heavy weather that led to eight fatalities”

Serious fire onboard caused by faulty electrical device

Posted on by News Hound
Serious fire onboard caused by faulty electrical device
Serious fire onboard caused by faulty electrical device

Hong Kong Marine Department has shared the findings of a serious fire accident, which took place onboard the accommodation of a Hong Kong registered bulk carrier whilst at anchorage. The investigation showed that the fire was most probably caused by a faulty electrical device or its accessories in a crew cabin, which led to a short circuit with the heat and sparks igniting the materials placed beside it.

The vessel was at anchorage, when a fire broke out in an unattended cabin of the vessel at night. A laptop computer was being charged in the cabin, and the electric source also supplied power for the lighting and refrigerator. The crew tried to put out the fire, but to no avail. All crew mustered at amidships of the vessel. The fire died down by itself about five hours later.

As a result, the accommodation on D deck and the bridge wings of the vessel were seriously damaged. There was no personal injury or oil pollution.

Continue reading “Serious fire onboard caused by faulty electrical device”

Physical surveys: Keep ‘boots on deck’ for better inspections, surveys and crew morale says Idwal

Posted on by News Hound
Importance of physical surveys - Idwal Chief Executive Officer Nick Owens (pictured)
Importance of physical surveys – Idwal Chief Executive Officer Nick Owens (pictured)

The pandemic has demonstrated the value of remote working but the industry must recognise the importance of physical connection to the ship. Idwal, a provider of ship inspection services, is calling on the industry to recognise the positive contribution that physical surveys make to vessel quality and crew morale.

Idwal provides blended remote and in-person vessel surveys on behalf of shipowners, banks, owners, brokers and charterers and believes that over-reliance on remote inspection technology creates risks for operators and worsens conditions for already over-stretched crews.

Last year saw a sharp rise in enquiries to deliver ‘internal inspection’ campaigns for owners and managers, suggesting owners wish to keep a closer eye on their vessels’ condition while their own people can’t travel. But the impact on crews of more remote inspections is increasing and the results are not always positive. Continue reading “Physical surveys: Keep ‘boots on deck’ for better inspections, surveys and crew morale says Idwal”

Sustainable Shipping Initiative publishes white paper for the use of new marine fuels

Posted on by News Hound
Sustainable Shipping Initiative publishes white paper for the use of new marine fuels
Sustainable Shipping Initiative publishes white paper for the use of new marine fuels

A new white paper from the Sustainable Shipping Initiative sets out 13 sustainability issues and principles surrounding low and zero carbon marine fuels which are under consideration as part of shipping’s energy transition.

The paper, defining sustainability criteria for zero and low carbon marine fuels, says attention must be paid to the lifecycle sustainability of bunker fuels, and its principles are intended to feed into the development of industry standards and third-party certification schemes ‘to assure and facilitate the selection of – and demand for – sustainable marine fuels’.

The sustainability principles and criteria are intended to be used by stakeholders across the shipping value chain ranging from shipowners; fuel producers and suppliers; Continue reading “Sustainable Shipping Initiative publishes white paper for the use of new marine fuels”

Transport Malta reveals pump room fatality caused by n-Butane intoxication

Posted on by News Hound
Transport Malta reveals pump room fatality caused by n-Butane intoxication
Transport Malta reveals pump room fatality caused by n-Butane intoxication

Transport Malta has published its investigation report on a crew fatality in the pump room of the crude oil tanker MT Valtamed, while at Ceyhan OPL Anchorage, Turkey, in February 2020. The autopsy found that the pump man died by n-Butane intoxication. The investigation believes that the presence of H2S in the bilge space may have also contributed, by either causing panic or unconsciousness.

Whilst Valtamed was at anchor awaiting berthing instructions, pre-arrival tests of the high-level alarms of the vessel’s cargo tanks, and the forepeak store and pump room bilges were being conducted by the crew members.After testing the atmosphere of the vessel’s pump room, the pumpman proceeded to the bottom platform to test the space’s bilge alarms.

Although the port side bilge alarm was successfully tested, the chief officer noted that starboard side bilge alarm had not activated within Continue reading “Transport Malta reveals pump room fatality caused by n-Butane intoxication”

New approval procedures published for in-water cleaning companies

Posted on by News Hound
New approval procedues published for in-water cleaning companies
New approval procedues published for in-water cleaning companies

The International Chamber of Shipping and BIMCO have published an approval procedure for in-water cleaning companies, aiming to set minimum requirements for approval of cleaning companies for various types of operations.

The Approval procedure for in-water cleaning companies is one of two separate documents that outline performance-based requirements for in-water cleaning of ship’s hull, propeller and niche areas with the capture of the materials that are removed during the process:

– Approval procedure for in-water cleaning companies (Approval procedure) Continue reading “New approval procedures published for in-water cleaning companies”

Instagram Posts from the IIMS @iimsmarine