Following recent fires onboard boxships, IUMI urges improved firefighting systems

Box container ship being hosed downA combination of ever larger container vessels, coupled with a number of recent fires onboard boxships has caused the International Union of Marine Insurance (IUMI) to call for better firefighting systems. IUMI is concerned that current provisions are inadequate. Consequently it and has published a paper calling for better onboard firefighting systems specifically for container vessels.

Whilst IUMI expressly welcomes the 2014 amendment to the International Convention for the Safety of Life at Sea (SOLAS) to increase the effectiveness of firefighting, the association believes more should be done to prevent fires onboard boxships.

Continue reading “Following recent fires onboard boxships, IUMI urges improved firefighting systems”

IIMS scoops Golden Shield award for its education programme

The Golden Shield CertificteThe IIMS distance learning commercial ship and yacht and small craft education programmes were recently nominated for an Award in the International Maritime Club’s Golden Shield Excellence Awards 2017 in the ‘Leading Maritime Training Institute’ category. And at the ceremony itself on Friday 15 September 2017 at the Lloyd’s Old Library in London, IIMS was announced as the winner in this category.

Vice President, Capt Zarir Irani, accompanied by Allen Brink, stepped in for IIMS CEO, Mike Schwarz, to receive the award. Continue reading “IIMS scoops Golden Shield award for its education programme”

Poor risk assessment contributed to the sinking of two MÆRSK supply ships says newly published DMAIB report

 MÆRSK supply ships moments before sinkingOn the night of 21 December 2016, the Danish offshore supply ships MÆRSK SEARCHER and MÆRSK SHIPPER capsized and sank in the Bay of Biscay, off the French coast, while being towed by another offshore supply ship, MÆRSK BATTLER, en route to Turkey. The Danish Maritime Accident Investigation Board has now published a report on the accident.

The incident

The ships were configured in a side-by-side towing setup during the voyage. During the passage of the English Channel, the fenders between the ships on tow failed, and the ships started to interact. This caused damage to the ships’ superstructure, which eventually compromised MÆRSK SEARCHER’s watertight integrity and led to water ingress. MÆRSK SEARCHER capsized and sank, and subsequently MÆRSK SHIPPER was pulled under by MÆRSK SEARCHER. The crew on MÆRSK BATTLER carried out a controlled breakage of the towing wire and came loose of the foundered towage. Continue reading “Poor risk assessment contributed to the sinking of two MÆRSK supply ships says newly published DMAIB report”

IMO updates guidelines for abandon ship drills using lifeboats

Lifeboat ready for deployment
Photo credit: Riley Huntley/wikipedia.org

At the 98th Session of its Maritime Safety Committee earlier this year, IMO plans to enshrine a range of amendments in to the guidelines relating to abandon ship drills using lifeboats with the aim of reducing related accidents.

The Committee approved the Guidelines on safety during abandon ship drills using lifeboats, following the amalgamation of annex 1 to the Measures to prevent accidents with lifeboats and the Interim Recommendation on conditions for authorization of service providers for lifeboats, launching appliances and on-load release gear in the Requirements for maintenance, thorough examination, operational testing, overhaul and repair of lifeboats and rescue boats, launching appliances and release gear.

Continue reading “IMO updates guidelines for abandon ship drills using lifeboats”

Lessons learnt from bunker fuel contamination incident highlighted by UK P&I Club

Bunker fuelThe UK P&I Club has issued guidance about a bunker fuel contamination incident which occurred onboard a general cargo ship during loading a bulk cargo. The Club has, provided details of what happened and highlights the important lessons learned.

This vessel was loading a bulk cargo in two of the vessel’s lower holds. During the loading operation, the vessel bunkered 500 MT of HFO into no.’s 2 port and starboard fuel oil side tanks. Shortly after the completion of bunkering operations, the Chief Engineer (C/E) noticed the level of no.2 port fuel oil tank was decreasing from observation of the remote gauging system.

Continue reading “Lessons learnt from bunker fuel contamination incident highlighted by UK P&I Club”

The Quadriga set to become the world’s biggest sailing cargo ship

Visulization of the QuadrigaAs innovators look for ways to further reduce the carbon footprint and create greener vessels using renewable technology in the future, it has been announced that Quadriga, an innovative sustainable shipping project from Hamburg based Sailing Cargo, aims to become the world’s biggest sailing cargo ship. It seems as if time goes in a full circle as developers look to significantly harness wind power once again and match it with ships.

The project outlines a plan to build a 170 metre car carrier, capable of carrying between 1,700 and 2,000 cars, which will be equipped with four DynaRig masts and will operate on hybrid propulsion with sails and diesel-electric engines, and an optional battery system for peak loads. The vessel will be capable of sailing at 10-12 knots with the aim of reaching 14-16 knots in the next few years through combined expertise.

Continue reading “The Quadriga set to become the world’s biggest sailing cargo ship”

Dangers of carrying nickel ore cargo from Indonesia and the Philippines highlighted

Risks of carrying nickel ore cargo from Indonesia and the Philippines highlighted by West P&I Club
Risks of carrying nickel ore cargo from Indonesia and the Philippines highlighted by West P&I Club

The West of England P&I Club has highlighted the mandatory notification requirements surrounding the perils of carrying nickel ore cargo from both Indonesia and the Philippines, ensuring that the necessary related safety measures are in place to comply with the IMSBC Code requirements. The Club explains the implications and advises all operators to take the necessary measures to mitigate these risks where possible. The Club says this may necessitate the appointment of a local surveyor to assist the Master.

“In accordance with the Club’s bye-laws, Members are required to notify the Managers before agreeing to carry a nickel ore cargo to ensure that they are fully acquainted with the risks beforehand and so that any concerns regarding the contractual terms of carriage may be addressed. Unless otherwise agreed in writing by the Managers, Members are also required to appoint a surveyor at the load port to provide assistance to the Master. Failure to fulfil these requirements may prejudice cover.” The Club says in a statement.

Continue reading “Dangers of carrying nickel ore cargo from Indonesia and the Philippines highlighted”

MV WERFTEN makes major investment in new Rostock shipbuilding hall

A group of men in suits standing infront of a building site Image courtesy of MV WERFTEN
Image courtesy of MV WERFTEN

At MV WERFTEN, construction work started on the new hall complex 11, which will house the new panel line and section line, as well as a line for section outfitting. With a volume of some €80 million, the new facility is one of the largest company investments in the region in the past decades.

The symbolic first cut of the spade, carried out by Genting Group’s Chairman and CEO Tan Sri Lim Kok Thay, Mecklenburg-Vorpommern’s Minister for Economic Affairs Harry Glawe, Rostock’s senior mayor Roland Methling and MV WERFTEN Chief Operating Officer Holger Tepper, signalled the beginning of the construction of the new hall 11.

Continue reading “MV WERFTEN makes major investment in new Rostock shipbuilding hall”

Hull Treatment Carrier is a new coating process by Blohm+Voss

Blohm+Voss set to roll out its new Hull Treatment Carrier process
Blohm+Voss set to roll out its new Hull Treatment Carrier process

Blohm+Voss is, exclusively, the first European shipyard to launch state-of-the-art technology for the coating of hulls developed by Hubert Palfinger Technologies (HPT). The new, cost-saving process, the Hull Treatment Carrier, sets new standards in quality and efficiency and makes a sustainable contribution to environmental and occupational safety. Hull Treatment Carrier is now available to Blohm+Voss customers for all repair and refit projects.

Removal with high-pressure water up to 3,000 bar, automated application up to 1,200 m. per hour per Hull Treatment Carrier, up to 30 percent less coating needed – Blohm+Voss, in cooperation with Palfinger, is setting the stage for new standards in the refit and repair sector by introducing to the market a new Hull Treatment Carrier system for surface treatment and colour application.

Continue reading “Hull Treatment Carrier is a new coating process by Blohm+Voss”

Standard P&I Club publishes a guide to enclosed space casualties

Enclosed Space Entry guide by Standard P&IThe Standard P&I Club says that investigation into enclosed space related casualties has shown that most are caused by poor training and knowledge of the correct entry procedures, or a total disregard for them. As a consequence, the Club has published a comprehensive guide to address all key issues and to help anyone to enter enclosed spaces safely. The Standard P&I Club guide highlights shortfalls in individual company procedures in equipment, training and onboard practices.

Firstly, Standard Club enlists incidents related to enclosed spaces which have been already reported to the Club, illustrating different ways in which a seafarer can put himself in danger in these areas onboard. Analysis of these incidents have helped the Club to address key factors that contribute to enclosed space casualties as follows:
• poor training
• failure to follow proper procedures for enclosed space entry
• failure to recognise the danger of an enclosed space
• tendency to trust physical senses and forego testing or checks
• attempts to save a co-worker leading to short cuts and failure to follow procedures
• failure to manage safely any shore workers on board. Continue reading “Standard P&I Club publishes a guide to enclosed space casualties”

New global project to address bioinvasions via ships’ hulls

A ship Hulls covered in seaweed and coralA new global project to help protect marine ecosystems from the negative effects of bioinvasions via ship hulls has been given the go-ahead for preparation.

The GloFouling Partnerships project – a collaboration between the Global Environment Facility (GEF), the United Nations Development Programme (UNDP) and the International Maritime Organization (IMO) – will address the transfer of aquatic species through biofouling, in other words, the build-up of aquatic organisms on a ship’s underwater hull and structures – known as a bioinvasions.

Continue reading “New global project to address bioinvasions via ships’ hulls”

Attention required when loading a clay cargo following liquefaction incident

The clay all over the hull of the ship - Image courtesy of West P&I Club
Image courtesy of West P&I Club

The West P&I Club has recently encountered a cargo liquefaction case involving a cargo of ball clay that was loaded in Lumut, Malaysia for discharge in Chittagong, Bangladesh. A similar case was reported in 2013. Therefore the Club issues this warning and urges operators to pay special attention when loading a clay cargo.

According to the cub, laboratory testing of samples of the cargo drawn from the vessel showed a Flow Moisture Point (FMP) of 29.7% and Transportable Moisture Limit (TML) of 26.7%, when determined on the flow table, and an FMP of 32.1% and TML of 28.9% when determined by the penetration test. The lowest moisture content of the cargo onboard was notably higher than either TML, at 36.4%.

Continue reading “Attention required when loading a clay cargo following liquefaction incident”

Instagram Posts from the IIMS @iimsmarine

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Show details
Performance & Marketing Cookies

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages. This also helps us optimise our marketing campaigns. User data sent to Google Analytics may be used for ad personalization and measurement of our ad campaigns. Keeping this cookie enabled helps us to improve our website.

Show details