Canal & River Trust will move resource from its centrally based roles into its six regional customer-facing teams to improve customer service and engage with local communities.
The changes will be made as part of the trust’s waterways and well being strategy and will see operational management roles adapted to meet the requirements of the new regions.
Richard Parry, CEO, commented: “The Trust has been repositioning as a charity for the waterways and well being, with a new structure that has seen us move from ten waterways to six larger regions, with some activities previously managed centrally now devolved to these regional teams, and a reduction in senior manager numbers overall.
On Tuesday 6th November at 11.00 UK time, IIMS opened the first 24-hour non-stop marathon Marine Surveying International Fest 2018, hosted live from the Institute’s offices in Portchester, Hampshire. The aim of the event was to recognise and celebrate as many different branches of the surveying profession as possible through a series of twenty four presentations with a new subject being introduced on the hour every hour. Presentations were delivered by experts in their field from various worldwide locations including Australia, New Zealand, America, Singapore, South Korea, UAE, India, Europe and the UK.
The heart-warming verbatim comments received immediately after the Fest from some of the delegates speak for themselves:
– “Despite the fact I have been a marine surveyor for 34 years the 24 hour Fest provided me with a massive (probably much needed) refresher course as well as new learning. Absolutely excellent in all respects. Congratulations and thanks to all.” Continue reading “Inaugural Marine Surveying International Fest 2018 voted a hit”
The report team found that the risk clearly depends on the level of congestion.
A new Volvo Ocean Race (VOR)-commissioned report has examined ocean racing at night in areas of high vessel traffic density to establish possible steps to mitigate risk following the death of a fisherman during the race.
The independent Volvo High Traffic Density Report follows the collision between Vestas 11th Hour Racing and a fishing vessel this January, in the final stages of the leg into Hong Kong during the most recent edition of the race. The crews recounted that virtually all the vessels had some form of lighting and exhibited AIS. The fishing vessels were either stationary or travelling at slow speeds of 3-6 knots and they did not form an impenetrable barrier.
Norfolk’s Cley Harbour has received its largest traditional working sailing vessel for more than 60 years, marking its return to activity after falling into disuse.
The Coastal Exploration Company owned 30ft open wooden gaff rigged whelk boat Salford came into the harbour to deliver a cargo of North Norfolk beer from Barsham Brewery to the Cley Windmill.
Simon Read, chairman of Cley Harbour committee said: “This is the largest traditional working sailing vessel to visit Cley in over 60 years and will be mark a key moment in the rejuvenation of Cley Harbour.”
Dumping plastics into the sea is already prohibited under MARPOL regulations, which also oblige governments to ensure adequate port reception facilities to receive ship waste.
The IMO has pledged to address the significant problem posed by plastics to the marine environment, with the adoption of an action plan which aims to enhance existing regulations and introduce new supporting measures to reduce marine plastic litter from ships.
The plan was adopted on October 26 by IMO’s Marine Environment Protection Committee (MEPC).
Dumping plastics into the sea is already prohibited under MARPOL regulations, which also oblige governments to ensure adequate port reception facilities to receive ship waste. Under the London Convention and Protocol on the dumping of wastes at sea, only permitted materials can be dumped and this waste – such as from dredging – has to be fully assessed to ensure it does not contain harmful materials like plastics.
For the next phase of construction; the installation of the upper decks to take place, the dry dock needed to be flooded and the hull then towed to the wet dock.
Unique Group’s Buoyancy & Ballast division has recently facilitated a high-profile dry dock project in Romania, involving the supply and operation of 840t of Seaflex inflatable buoyancy.
The hull and lower decks of the Australian Antarctic Division’s (AAD) new icebreaker Nuyina were constructed in the dry dock at Damen’s Galati Shipyard.
“Our Buoyancy & Ballast division is truly unique within the market and we consistently bring added value to our clients, working in partnership,” said Chris Sparrow, global sales manager, Buoyancy & Ballast at Unique Group.
The atmosphere in each cargo hold should be monitored, at least on a daily basis, for CO, hydrogen sulphide (H2 S), oxygen (O2) and flammable gas (LEL-methane).
London P&I Club has analysed the problems associated with the transportation of coal in bulk, such as self-heating and flammable gas (i.e. methane) release. Self-heating can lead to fires and the production of carbon monoxide (CO), whilst methane release can lead to an explosive atmosphere being generated in the hold.
Self-heating normally occurs in localised hot spots within a bulk cargo, and temperature measurements are unlikely to identify problems. However, when coal self-heats it produces CO, so measuring the concentration of CO is the most effective method to identify a self-heating cargo.
The atmosphere in each cargo hold should be monitored, at least on a daily basis, for CO, hydrogen sulphide (H2 S), oxygen (O2) and flammable gas (LEL-methane). If the holds are being ventilated, then ventilation should be stopped at least Continue reading “Preventing coal cargo from self-heating”
A number of safe bunkering measures are required for each bunkering operation. These can be divided into four stages and checks
The UK P&I Club has published helpful guidance to ensure safe bunkering operations. The Club said that bunkering operations are routine and critical, high risk operations which require to be carefully planned and performed.
Causes of bunker spills
Although the most of the bunker transfers are carried out without incident, very occasionally, things can and do go wrong. The UK Club notes that only a minority of cases do bunker spills occur because of failure of the hoses or pipelines, while the majority of spills result from a tank overflowing.
But these are not the only causes. Common causes of bunker spills can be summarised as follows:
– Improper set up of pipeline system valves: Potentially causing either overpressure, or flow of bunkers to an unintended location;
– Insufficient monitoring of tank levels during bunkering: All tanks, not only those Continue reading “How to conduct a safe bunkering operation”
The FRPD 309 sustained damage to the shell plating and forepeak tank forward of the collision bulkhead. In addition, the port anchor was disconnected from its housing and became wedged in the Evco 60’s hull
The Transportation Safety Board of Canada released its investigation report into the collision of the dredger FRPD 309 with the loaded barge Evco 60, on 5 December 2017, in the Fraser River.
The incident
On 04 December 2017, the dredger FRPD 309 departed a shipyard in Delta, BC, to begin dredging in the Fraser River. The vessel is a conventional trailing arm suction dredger, with the bridge and accommodation located forward and machinery space located aft. Before departure, the crew had carried out pre-departure checks, a safety meeting, and emergency drills.
After arriving at the dredging location, the vessel started dredging sand and sediment from the river bed into the hopper using the 2 trailing arms and a dredging pump. When the hopper was filled, the sand and sediment was pumped ashore via a pipeline. The master left the bridge, handing over the command of the vessel to the officer of the watch (OOW). Two engineers, 2 deckhands, and a pipe operator were also on duty.
The future development of Bavaria is taking clear shape: The yacht builder, respected worldwide for its good price/performance ratio, will once again build its boats one hundred percent in Germany. Bearing the seal of quality “Made in Giebelstadt”, both sailing and motor yachts will be manufactured and handed over to customers in Franconia. The R55 motor yacht, previously produced in Croatia, will for the first time be hand-built at the company’s headquarters in the first half of 2019. The moulds and tools are currently being transported from Croatia to Germany and installed in Giebelstadt.
“We want our outstandingly well trained and committed employees to develop and build all our yachts primarily under own management. The workforce identifies strongly with Bavaria Yachts; it is the key feature of our company,” explains Managing Director Erik Appel, who has been Chief Operating Officer of Bavaria Yachts since December 2017. “This is why we intend to further increase our permanent staff and simultaneously reduce the proportion of temporary workers. This will help considerably to bring down Continue reading “Bavaria Yachts is relying on 100 percent Made in Giebelstadt for future success”
This urgent bulletin has been issued after working in a refrigerated saltwater tank resulted in a fatal accident on board fv Sunbeam (FR487) at Fraserburgh, Scotland.
Initial findings
At about 0900 on 14 August, FV Sunbeam crew arrived at the vessel’s berth ready to begin work. The vessel’s refrigeration plant had been shut down after landing the final catch at Lerwick, and its RSW tanks had been pumped out and tank lids opened in preparation for deep cleaning. At some time between 1200 and 1350, Sunbeam’s second engineer entered the aft centre RSW tank and collapsed.
On the drawing board is a ship known as Havfarm (“Ocean Farm”), 430 metres in length and 54 metres wide, it will lay at anchor, fixed to the seafloor using the offshore industry’s technological solutions.
In conjunction with Nordlaks, NSK Ship Design has designed an aquaculture ship that could be the beginning of a sustainable revolution in the fish farming industry, named the Havfarm.
There is an air of excitement at NSK Ship Design, because they have been quietly working away since June 2015 on a special project for Nordlaks – a project that can be classified as no less than sensational for the fish farming industry.
