News Hound

Bahamas Maritime Authority issues a warnings about Alcares lifejacket light battery failure

Posted on by News Hound

Corroded and exploded batteryThe Bahamas Maritime Authority has issued a technical alert to bring to operators’ and inspectors’ attention that deficiencies have been found in lifejacket lights manufactured by Alcares in particular types Jack A1-Alk and Jack ARH-Alk, distributed by Datrex. A number of ships have reported issues relating to these defective lifejacket lights.

The notice highlights the following:
– Examination of the lights revealed that the batteries had leaked, resulting in contamination on the main board and resulting in the lights being considered unfit for further use.
Continue reading “Bahamas Maritime Authority issues a warnings about Alcares lifejacket light battery failure”

New unified ship design revealed by Rolls-Royce

Posted on by News Hound

Rolls Royce Ship DesignsMarine giant, Rolls-Royce, has showcased an extensive overhaul of its design philosophy which it believes will set the tone for the immediate future. Their aim is to optimise construction and operations without reducing the use of available space on board. As a consequence, any Rolls-Royce designed vessel will become instantly recognizable worldwide no matter what type it is.

The new design incorporates four key features in each design. These are:
– a knuckle line that slopes down towards the bow and links the new designs with older UT and NVC designs,
– a vertical side area and
– vertical upper stem, which simplify the design and decouples the hull form from the superstructure.
– a topside sheer line with a small convex curvature.

Continue reading “New unified ship design revealed by Rolls-Royce”

The world’s first class approved 3D printed propeller WAAMpeller is on the horizon

Posted on by News Hound
The WAAMpeller propeller will be based on a Promarin design that is typically found on a Damen Stan Tug 1606
The WAAMpeller propeller will be based on a Promarin design that is typically found on a Damen Stan Tug 1606

Marking a major step forward in the application of 3D printing techniques in the maritime sector, Damen Shipyards Group has entered a cooperative consortium with RAMLAB, Promarin, Autodesk and Bureau Veritas. The goal of this group of forward-looking companies is to develop the world’s first class approved 3D printed ship’s propeller, to be called the WAAMpeller.

Damen’s involvement in the project began just over a year ago as a result of one of its in-house student research programmes. Continue reading “The world’s first class approved 3D printed propeller WAAMpeller is on the horizon”

UK P&I Club issues advice on cargo cold treatment failure

Posted on by News Hound

A collection of fruitUK P&I Club says that it has seen an increase in refrigerated cargo claims for fresh fruit being shipped from South America to the United States due to cargo cold treatment failure. George Radu, Claims Executive at Thomas Miller Americas, comments on this increase and offers prevention solutions.

The process of cargo cold treatment is a more efficient way to exterminate fruit insects than fumigation, as it maintains a sufficient low temperature for a pre-determined period, in order to exterminate insects and larvae in perishable cargo. The period and temperature required are defined in protocols established by the relevant authorities of the importing countries.

Continue reading “UK P&I Club issues advice on cargo cold treatment failure”

Baltic Yachts announces the launch of the world’s largest carbon-fibre sloop

Posted on by News Hound
The world’s largest carbon-fibre sloop has been launched by Baltic Yachts
The world’s largest carbon-fibre sloop has been launched by Baltic Yachts

The Baltic Yachts 175 Pink Gin VI, the world’s largest carbon-fibre sloop, embarked on an unusual maiden voyage recently – by road. She was safely transported over a distance of 21km by a specialist low-loader from Baltic Yachts’ inland manufacturing site at Bosund to their waterfront yard in Jakobstad in preparation for final fit out and imminent launch next month.

The all carbon composite 160-ton, silver sloop might be impressively light for a yacht of her size, but she proved quite a challenge for the local road system. She travelled at an average speed of about 10km/hr during the journey during which roundabouts, a railroad crossing and other obstacles had to be negotiated. Baltic Yachts had permission to widen the road and temporarily removed traffic signs so that the unusual load could travel safely along her way.

Continue reading “Baltic Yachts announces the launch of the world’s largest carbon-fibre sloop”

Code of Safe Practice for Cargo Stowage and Securing – CSS Code – updated by Panama Maritime Authority

Posted on by News Hound
The CSS Code provides an international standard to promote the safe stowage and securing of cargoes
The CSS Code provides an international standard to promote the safe stowage and securing of cargoes

Instructions from the Administration of Panama regarding IMO MSC.1/Circ. 1352/Rev.1 Code of Safe Practice for Cargo Stowage and Securing – CSS Code Annex 14 – were announced in ClassNK Technical Information No. TEC-1097 dated 28 December 2016. The Administration has updated MERCHANT MARINE CIRCULAR MMC-340, including their additional guidance on the application of relevant requirements to existing containerships, as attached.

This Technical Information supersedes the previous ClassNK Technical Information No.TEC-1097 dated 28 December 2016.

Continue reading “Code of Safe Practice for Cargo Stowage and Securing – CSS Code – updated by Panama Maritime Authority”

Marshall Islands Registry issues advisory note following an explosion on a coal laden carrier

Posted on by News Hound
Photo not the vessel involved in the Marshall Islands Registry flagged incident
Photo not the vessel involved in the Marshall Islands Registry flagged incident

The Registry has issued an advisory note to alert the wider shipping community to the fact it is currently conducting a serious marine casualty investigation into the fatality of two seafarers, which occurred recently onboard a Marshall Islands Registry flagged vessel. Marshall Islands Registry has published its preliminary findings into the incident, which is still ongoing, so that it might help to identify potential risks and preventing similar incidents from taking place.

The vessel involved was a bulk carrier laden with coal. Marshall Islands Registry regrets that two seafarers died and two others were severely burned following the explosion and fire, which took place in the Bosun’s Store Room.

Continue reading “Marshall Islands Registry issues advisory note following an explosion on a coal laden carrier”

Spinlock extends the use of ceramic coated parts

Posted on by News Hound
Ceramic coated parts for jaws and bases are now included in Spinlock products
Ceramic coated parts for jaws and bases are now included in Spinlock products

The movement to smaller diameters of rope on board, increased loads and more powerful sails continues is putting increased demands on rope holding products.

To counteract this issue, Spinlock has now extended the use of ceramic coated parts to jaws and bases across its XX0812, XCS and XTS clutches.

“Confidence in the product is very high,” explained Doug Vincett, Spinlock technical sales and support. “Ceramic coated parts are being used in a lot more products, they give a better grip when using modern lines.”

And he explained how the ceramic coating parts allow the cam or jaws to engage quicker on a loaded line, taking up the load faster and with less creep.

Continue reading “Spinlock extends the use of ceramic coated parts”

MAIB published its report on the Love for Lydia carbon monoxide deaths tragedy

Posted on by News Hound
Photograph of motor cruiser Love For Lydia
Photograph of motor cruiser Love For Lydia

Between 7 and 9 June 2016, the two occupants of the motor cruiser Love for Lydia died from carbon monoxide poisoning. The boat was moored alongside Wroxham Island, River Bure, Norfolk, and their bodies were found during the afternoon of 9 June in the boat’s forepeak cabin.

The MAIB investigation identified that:
• The source of the carbon monoxide was exhaust fumes from the boat’s eight-cylinder petrol engine, which contained high levels of the gas even when the engine was ‘idling’.
Continue reading “MAIB published its report on the Love for Lydia carbon monoxide deaths tragedy”

Game Changer, completes sea trials

Posted on by News Hound

The Ship, Game ChnagerDamen has reported its 69m superyacht support vessel, Game Changer, has completed her sea trials in the North Sea, with an 11.3m tender, 10.5m RIB and U-Boat submersible on her aft deck throughout.

The second hull in this particular range by Damen, Game Changer was designed in-house and constructed from a steel hull and aluminium superstructure.

She follows on from support vessel 6911 Intrepid, and is now the 11th superyacht support vessel to have been built by Damen.

Continue reading “Game Changer, completes sea trials”

Beware the potential for malfunctioning limit switches on fast rescue craft says new report

Posted on by News Hound

Marine Safety Forum appThe Marine Safety Forum has issued a report about two separate reported incidents within the last month. Limit switches not operating as intended on two chartered vessels has caused damage and opened up the potential for serious injury.

The incidents
The first incident with limit switches occurred in early March to an Emergency Response and Rescue Vessel (ERRV). The vessel had been carrying out a period of close standby cover so had its port FRC lowered to the embarkation position ready for immediate deployment. Once the work parties had finished for the day, the vessel departed the 500m zone and commenced hoisting the FRC ready for sea-fastening. This davit operation was carried out by a trainee under the supervision of the Boatswain.

Continue reading “Beware the potential for malfunctioning limit switches on fast rescue craft says new report”

VPLP design launches Oceanwings

Posted on by News Hound
Oceanwings is a new development and concept from VPLP
Oceanwings is a new development and concept from VPLP

Drawing on extensive experience in the field of rigid sail development, France’s VPLP Design has developed a two-element wingsail for commercial craft which is furlable, reefable and entirely automated.

Called Oceanwings, this new automated sailing system has been tested on small sail craft but is being developed for use as a sail assistance system for shipping.

VPLP Design’s interest in rigid sails started in 2010, when they were involved in the design of high performance America’s Cup sailing Continue reading “VPLP design launches Oceanwings”

Instagram Posts from the IIMS @iimsmarine

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Show details
Performance & Marketing Cookies

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages. This also helps us optimise our marketing campaigns. User data sent to Google Analytics may be used for ad personalization and measurement of our ad campaigns. Keeping this cookie enabled helps us to improve our website.

Show details
Powered by  GDPR Cookie Compliance