News Hound

British Coatings Federation to launch protect, collect and dispose antifouling initiative

Posted on by News Hound
British Coatings Federation to launch protect, collect and dispose antifouling initiative
British Coatings Federation to launch protect, collect and dispose antifouling initiative

The British Coatings Federation (BCF), along with the Green Blue (a joint initiative between the Royal Yachting Association and British Marine) and the Yacht Harbour Association (TYHA), will launch their Protect, Collect and Dispose Antifouling Initiative at the 2019 Marina Conference in Bournemouth on 24th-25th April.

The objective of the initiative is to inform as many people as possible about environmental best practice when antifouling boats.

This initiative builds on the successful, award-winning DIY Safe Antifouling programme BCF, RYA and British Marine launched in 2017.

It is intended for those who antifoul their own vessels, as well as for marinas and boatyards who are offering professional antifouling services.

Continue reading “British Coatings Federation to launch protect, collect and dispose antifouling initiative”

Cowes Harbour Commission creates new channel for small craft

Posted on by News Hound

Cowes Harbour Commission has completed the dredging of a new Eastern Channel for craft up to 20m in length.

The channel will provide a more direct route to the Solent than the previous Small Craft Channel. It will be suitable for use at all states of the tide.

“It allows smaller vessels safe access to and egress from Cowes Harbour, reducing potential conflict with the ferry and commercial traffic movements,” explained Capt. Stuart McIntosh, Cowes harbour master.

The 35m wide Eastern Channel is dredged to 2.25m below chart datum giving a minimum depth of water equal to the height of tide plus 2.25m.

Continue reading “Cowes Harbour Commission creates new channel for small craft”

Advice on how to ensure containers are stacked safely on board container ships

Posted on by News Hound

Uwe-Peter Schieder, Loss Prevention Manager at GDV (German Insurance Association – Gesamtverband der Deutschen Versicherungswirtschaft) and Vice-Chair of IUMI’s Loss Prevention Committee, provides his comment on securing containers on deck of a container ship.

Mr. Schieder says that there are six different motions in which vessels move in the sea, with the main of them being pitching, heaving and rolling.

However, lateral rolling motion presents the greatest risk for stacks of containers.

In order for containers to be safely transported on the deck of a container ship, this must be done with the help of twistlocks.

These are inserted into the corner castings of the containers, which have elongated holes. There, the rotating lug of the twistlock engages locks the Continue reading “Advice on how to ensure containers are stacked safely on board container ships”

Crack in cargo hold cover leads to wet damage described in latest Swedish Club bulletin

Posted on by News Hound

In its monthly safety scenario, April edition, the Swedish Club describes a case of cargo damage caused by water ingress due to a crack in the hatch coaming.

The incident resulted in several days of delay for the ship to get the wet cargo off the vessel, while most of the cargo was refused by the buyer.

The bulk carrier had a full cargo of zinc concentrate onboard and was sailing from the west coast to the east coast of South America.

When the vessel passed Cape Horn, it experienced heavy weather of Beaufort scale 9 with green sea covering the cargo hold covers 1, 2 and 3.

This continued for 4 days as the vessel battled the waves. The vessel had no weather routing.

When the weather had calmed down the master asked the chief officer to inspect the cargo holds. The chief officer found that water had Continue reading “Crack in cargo hold cover leads to wet damage described in latest Swedish Club bulletin”

ABS publishes expanded and updated best practices for ballast water management systems report

Posted on by News Hound
Workshop attendees reviewed the best practices that support successful BWM system integration.
Workshop attendees reviewed the best practices that support successful BWM system integration.

ABS published its updated Best Practices for Operation of Ballast Water Management (BWM) Systems Report, offering fresh insight on best practices to overcome key challenges with selecting, installing and operating a BWM system.

First published in 2017, the updated 2019 Report captures the key discussion items, lessons-learned and valuable insight gathered and shared during its global program of industry workshops, shaped by questionnaires from owners and operators of vessels with BWM systems.

“Our engagement with the industry has helped us gain a deep understanding of the challenges from around the globe, which we used to develop and enhance our guidance to industry,” said Derek Novak, ABS Senior Vice President for Engineering and Technology. “Working closely with owners and operators we produced detailed best practices for mitigating and minimizing issues with the installation and operation of BWM systems.”

Continue reading “ABS publishes expanded and updated best practices for ballast water management systems report”

Port State Control common deficiency areas on liquefied gas carriers cited

Posted on by News Hound

This article addresses five common deficiencies that Sector Houston-Galveston Port State Control Officers (PSCOs) have fund on liquefied gas carriers. In 2018, Sector Houston-Galveston conducted 141 Certificate of Compliance (COC) exams on liquefied gas carriers, seven of which resulted in IMO detentions. This equates to a 5% detention ratio, which is more than double the national average for IMO detentions in 2018 (1.5 %). Some combination or other of the below listed deficiencies were cited in all of the Sector’s aforementioned gas carrier detentions. The purpose of this article is to share information and prompt owners, operators, surveyors and other involved parties to take proactive steps to identify and correct sub-standard safety and environmental stewardship conditions before Coast Guard port state control intervention, including COC removal, cargo cessation and/or detentions, becomes necessary.

Continue reading “Port State Control common deficiency areas on liquefied gas carriers cited”

New technology aims to reduce underwater radiated noise generated by ships’ propeller cavitation

Posted on by News Hound
While PressurePores are suitable for all types of vessel, they are particularly suitable for naval vessels, fishing fleets, offshore vessels and cruise ships operating in sensitive environments.
While PressurePores are suitable for all types of vessel, they are particularly suitable for naval vessels, fishing fleets, offshore vessels and cruise ships operating in sensitive environments.

A new technology aimed at reducing the underwater radiated noise (URN) generated by ships’ propeller cavitation has been developed by Strathclyde University and Oscar Propulsion.

The patented Oscar PressurePores system reduces propeller tip vortex cavitation by applying a small number of strategically bored holes in the propeller blades.

The addition of these pressure-relieving holes now allows ships to operate with a more silent propeller with a minimum of compromise on its efficiency or having to slow steam. Reducing cavitation also reduces its associated erosive effect.

Continue reading “New technology aims to reduce underwater radiated noise generated by ships’ propeller cavitation”

AMSA changes to shipping registration have come into force

Posted on by News Hound

Starting from 1st April 2019, the Australian Maritime Safety Authority (AMSA) has applied changes to shipping registration laws.

Registering a ship: There are no changes to the way that you register a ship on the Australian Registers unless you do not know the vessel’s full ownership history. Namely:
– Ships registered on the Australian general shipping register have Australian nationality.
– Registration of a ship on the Australian general shipping register provides legally and internationally recognisable nationality to your ship. When registered, you will have Australian protection on the high seas and in foreign ports.

Continue reading “AMSA changes to shipping registration have come into force”

IG Clubs continue to implement survey triggers for tankers carrying HFO

Posted on by News Hound
If a vessel continues to carry HFO as cargo over a period of successive years, the Club is not obliged to carry out a survey every year.
If a vessel continues to carry HFO as cargo over a period of successive years, the Club is not obliged to carry out a survey every year.

As part of the industry’s efforts to ensure higher ship standards, the International Group of P&I Clubs (IG Clubs) continues to implement survey triggers for seagoing vessels of 10 years of age or more carrying HFO, the American P&I Club has reminded the industry in a bulletin.

As a consequence, all sea-going vessels aged 10 years or more which have carried heavy HFO as cargo within the previous 12 months will be subject to condition survey, unless:
– the vessel has undergone a P&I club condition survey during the previous 12 months; or
– the vessel has undergone a Special Survey during the previous 6 months; or
– the vessel has a valid Condition Assessment Program (CAP) rating of 1 or 2 with a classification society having membership in the International Association of Classification Societies (IACS).
– HFO is defined as residual fuel with a kinematic viscosity of 380 centipoises when measured at 50 degrees Celsius by the ISO 3104 test method.

Continue reading “IG Clubs continue to implement survey triggers for tankers carrying HFO”

Surveyor’s fall from a stepladder caught on camera in US terminal

Posted on by News Hound

The North of England P&I Club has given details of a recent incident involving a surveyor’s fall at a US terminal, such that when a vessel is in port and something happens, there is a strong chance it has being caught on camera.

According to data provided by Gary Hemphill, from Phelps Dunbar LLP, a surveyor onboard a ship moored at a US terminal, fell from the stepladder when departing the vessel. A crew member alerted the Master, who saw the surveyor lying on the concrete wharf apron about 20 feet below with his leg badly broken.

The terminal operator contacted emergency medical personnel and the injured surveyor was taken away by ambulance. The ship’s crew took photographs of the surveyor as he lay on the wharf apron and as he was loaded into the ambulance.

Continue reading “Surveyor’s fall from a stepladder caught on camera in US terminal”

MAIB safety digest with analyses of 25 accidents volume 1 2019 published

Posted on by News Hound

The Marine Accident Investigation Branch (MAIB) has published a digest and analyses of twenty five marine recent incidents and accidents with short descriptions about each involving vessels from the merchant, fishing and recreational sectors. The 70 page report can be accessed and downloaded here or at the foot of this page.

In his introduction to the Digest, Andrew Moll says, “I’d like to thank this edition’s introduction writers. I am delighted that Captain Nick Nash, Andrew Locker and Steve Gravells have agreed to write the introductions to the merchant, commercial fishing and recreational craft sections of this digest. All three have written from both their professional and own personal perspectives, and their words are very powerful. If you read nothing else in this issue, I would encourage you to read the section introductions.

Continue reading “MAIB safety digest with analyses of 25 accidents volume 1 2019 published”

Restoration work begins on Loch Lomond paddle steamer

Posted on by News Hound

Work on the iconic paddle steamer berthed in Loch Lomond has taken significant steps forward, in a bid to get the historic Maid of the Loch fully restored to her former glory.

Following a £950,000 cash injection from The Scottish Government, the Loch Lomond Steamship Company (LLSC) has contracted out vital structural work to naval architects, Marine Design International Ltd. This particular stage is necessary for meeting the required safety standards and will place a strong focus on the vessel’s current state by surveying, calculating and designing any adjustments which may have to take place.

Continue reading “Restoration work begins on Loch Lomond paddle steamer”

Instagram Posts from the IIMS @iimsmarine

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Show details
Performance & Marketing Cookies

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages. This also helps us optimise our marketing campaigns. User data sent to Google Analytics may be used for ad personalization and measurement of our ad campaigns. Keeping this cookie enabled helps us to improve our website.

Show details
Powered by  GDPR Cookie Compliance