A recent Safety Flash from IMCA (International Marine Contractors Association) focuses on an incident in which water got into Lithium-ion batteries in equipment for use subsea causing an explosion.
Inspection of the equipment after a successful deployment identified a potential leak from one of the metal tubes. However, other work priorities meant that the technician in charge of the equipment decided to leave it in its storage area and delay the removal and further examination of the battery. Seven hours later, the vessel’s bridge team heard a loud bang followed by a fire detection system warning for the deepwater equipment storage area. The attending crew members discovered a scorched and damaged metal battery tube lying on the deck. There were no injuries.
Examination of the battery tube indicated that sea water had leaked into the battery compartment and contaminated the Li-ion battery, which caused pressurised gasses to build up and self-combust and resulted in a brief explosion. The remaining battery tubes were removed to a secure storage area for further checks.
Lessons learned
– Lithium-ion batteries are widely used in IMCA members’ operations, and they are potentially very hazardous. A 1kg Li-ion battery can store the same amount of energy as a 6kg NiMH (Nickel metal hydride) or lead acid battery.
– Lithium-ion battery failures do occur; fires in Lithium-ion batteries can be difficult to extinguish.
– Lithium reacts intensely with water, which can corrode or damage the internal battery safety devices and cause it to overheat, ignite, rupture or leak. Some of the chemicals produced by burning Lithium-ion batteries can be very dangerous.
– A Li-ion battery that is found to be damaged or affected by water should not be used or charged. Remove the battery to a secure place where it can be monitored and potential spontaneous combustion can occur safely. In the event of a fire, use an appropriate fire extinguisher to put it out.